Accumulation tank with stratified pipe S and SS
The volume in attack S and SS stratification tanks ranges from 488 to 1960 liters with the possibility of installing an electric heating element. The strafication storage tank has the possibility of connection to a solar system or heat pump, you can use the ATTACK SS model. The tank is equipped with a disc and a stratification pipe, where it allows layered storage of water according to temperature. The storage tank is a robotic welding machine, which extends its service life. Increases the performance and efficiency of the boiler. With full power and optimal efficiency, you consume less fuel, which is also done by the layering system. Heating with a stratification tank will become greener. Another advantage is the minimum amount of tar and acids during combustion and consequently the high life of the boiler and chimney.
Accumulation tank with stratified pipe S
Accumulation tank is based on type ATTACK AK. Disk and stratified pipe is installed inside the boiler. This construction element provides different temperature layers at the inlets and the outlets.
Accumulation tank with stratified pipe SS
Accumulation tank is based on type ATTACK AS a ATTACK S. It is additionally equipped with one exchanger for connection to a solar system or heat pump. This construction element provides different temperature layers at the inlets and outlets.
Accumulation tank ATTACK S
Accumulation tank ATTACK SS
Accumulation tank with stratified pipe and the heating methods
The accumulation tank can be combined with various heating methods (storage electricity, solar systems or heat pumps). Of course, a possible combination is also with radiators and underfloor heating.
Connection of the accumulation tank in the heating system
Each standard accumulation tank with stratified pipe S and SS is also supplied with a soft removable insulating layer to better keep your storage tank warm. Insulation with a thickness of 100 mm of polyester fibers with imitation leather cover is installed on tank.
More effecitve combustion with biomass boilers
For protecting boilers DPX, DPX Combi Pellet, SLX, SLX Combi Pellet, Pellet30 Automatic Plus and Wood&Pellet against damage and ensuring its long life-time we recommend to install the accumulation tank in combination with the mixing device Oventrop. For regular service it is very important to buy the boiler in the country you live in.
Boilers for biomass
Accumulation tank with stratified pipe
ATTACK S a SS
1 – Flow connection – boiler – 1 ½”
2 – Freely utilizable – 1 ½”
3 – Electrical heating coil (EL) – 1 ½”
4 – Freely utilizable – 1 ½”
5 – Return connection – heating circuit – 1 ½”
6 – Flow connection – heating circuit (radiators) – 1 ½”
7 – Flow connection – heating circuit (floor) – 1 ½”
8 – Return conn., gas, oil or pellet boiler – 1 ½”
9 – Return connection – wood boiler – 1 ½”
10 – Sensor of solar system or heating – ½”
AS – Flow connection of solar system – 1″
RS – Return connection of solar system – 1″
SF – Upper solar sensor – ½”
SU – Bottom solar sensor – ½”
D1 – Diameter without insulatione
D2 – Diameter with insulation