Combined boiler with high comfort
When using pellets with a fully automatic Pellet Burner Automatic, the level of heating comfort is moved to a higher level. The burner can handle most of the work without any problems. The wood and pellet boiler will easily take care of the automatic cleaning of the grate, start and end of combustion. By using a room thermostat you can increase the comfort even more and control its operation without visiting the boiler room.
Extra-large feeding chamber
The combined wood and pellet boiler uses all the advantages of the SLX boiler and high comfort is no exception. It provides an extra-large feeding chamber (200 liters) and long heating per one load of fuel. If you decide to heat wood from this boiler, you will save your time from processing the wood into smaller pieces. Larger pieces of wood save not only time but also extend the burning life per load of fuel.
Feeding chamber of boiler SLX possible to use by the boiler SLX Combi Pellet
The plug is used to change the fuel from pellets to wood
Easy fuel change
The great advantage of the SLX Combi Pellet boiler is the combination of cheap and ecological thermal energy obtained by wood gasification and comfort thanks to a fully automatic pellet burner. The fuel change in the SLX Combi Pellet has been designed with particular emphasis on simplicity and low time intensity. The conversion from a gasifying boiler to a pellet boiler is so very simple and can be handled by everyone. The fully automatic pellet burner is mounted on a moving pantograph so it is very easy to insert into the upper door of the boiler and you can use pellets as fuel.
Technical information of important parts of the boiler that may be of interest to you.
The boiler has a control unit PROFI:
Electronics with simple operation. With this electronics, the air supply control and exchanger cleaning are manual. More about PROFI electronics PROFI
The boiler is equipped with a high-efficiency tube heat exchanger with turbulators which contribute to the high efficiency of the boiler and reaches a value of up to 92%.
Refractory concrete fitting
Long boiler life: Reliable operation is also ensured by a high-quality refractory concrete nozzle that can withstand temperatures up to 1350 ° C.
Loading chamber door
Wood with a length of up to (650 mm) can be loaded into the boiler through the loading door. The boiler has an oversized loading chamber with a volume (200 liters). The advantage of the above-standard loading space is the division of wood at the meter which you only need to divide once.
The turbulator cleaning lever is used to clean the dirt deposited between the turbulators.
The side opening of the boiler is used to clean the ash from the turbulators. The cleaning intensity depends on the heating intensity in the boiler.
It is used to maintain the boiler output.
It is used to cool down the exchanger when the boiler emergency temperature is reached.
The boiler is also equipped with tar protection which is taken care of by a dry coat located around the perimeter of the entire loading chamber.
Combustion chamber door
The lower door is mainly used to clean the ash from the boiler. With the PROFI version, it is also possible to set the air supply manually.
Special doors for changing fuel
Special doors for changing fuel in case you decide to heat only with wood.
Pellet burner ATTACK Pellet Burner Automatic offers comfort not only when burning fuel but also setting and control. Pellets are automatically drawn from the fuel feeder which fall into the burner on the grate where they ignite with electric ignition and the combustion itself begins.
There is a burner on the pantograph which thanks to the pantograph can be easily removed and inserted into the boiler.
Combined boiler ATTACK SLX COMBI PELLET with pellet tank
Combined boiler with even higher efficiency
ATTACK SLX Combi Pellet is developed with an emphasis on achieving high efficiency. The PROFI regulation that controls the boiler is very simple, intuitive and has many functions that the boiler performs itself. The boiler is automatically shut down after the fuel burns out, automatic cleaning, control of the heating pumps and charging of the accumulation tank or even control of the heating through a computer or smartphone. We recommend purchasing an ATTACK Oventrop equipment and the accumulation tank to achieve higher boiler output. For regular service it is very important to buy the boiler in the country you live in.
The boiler enables operation of wood and fully automatic operation of pellets• High-efficiency tube heat exchanger• High combustion efficiency up to 91.6%• Large feeding chamber up to 200 l• Made of special boiler steel 6 mm thick to ensure long boiler life• Reduced operating costs per season due to the possibility of combining fuels• Compact design, easy operation, information display on LCD• Possibility of connecting a temperature sensor to the accumulation tank• Control of burner operation via room thermostat or temperature probe• Possibility of burning wood pellets with diameters of 6 mm, length up to 35 mm• Post-cooling circuit• Display of operating states• Errors diagnosis
Burning in pellet burner pellet burner automatic