Biomass boiler with unique huge feeding chamber
Easier loading of fuel into the boiler. We equipped the ATTACK DPX biomass boiler with an oversized feeding chamber (82 and 190 liters) with a length (350 mm and 750 mm).
Oversized feeding chamber with 128 litres
When the feeding chamber is used fully, the fuel in the boiler will burn continuously for 8-12 hours (only for permanent operation). Time will shorten long burning. It is enough to divide the meter only once thanks to the length of large feeding chamber .
Biomass boiler ATTACK DPX 80 and ATTACK DPX 100
They provide a feeding chamber length of up to 1100 mm. You can easily load even metre pieces of wood into them.
Automatic chimney flap
The DPX boiler has an automatic chimney flap. The flap ensures direct towing of flue gases from the loading chamber to the chimney and also is used for easier start of burning. Opening the loading door opens the flap, closes automatically when it closes and you no longer have to operate the boiler manually.
Boiler for wood and quality workmanship
The DPX biomass boiler like all our products is being produced with an emphasis on the selection of quality materials and the use of the right technologies and procedures. Special boiler steel with a thickness of 6 mm, movable turbulators, refractory concrete fittings resistant to temperatures up to 1350 ° C. All this guarantees the quality of your new boiler.
Technical information of important parts of the boiler that may be of interest to you.
The boiler has a choice of three types of control electronics:
STANDARD - Electronics with basic control. Especially suitable for simple systems that do not require complex settings. More about STANDARDelectronics.
PROFI - Electronics with simple operation. With this electronics, the air supply control and exchanger cleaning are manual. More about PROFIelectronics.
LAMBDA - Electronics with LCD display. The air supply is controlled automatically by servomotors. More about LAMBDA electronics.
The boiler is equipped with a high-efficiency tube heat exchanger with turbulators which contribute to the high efficiency of the boiler and reaches a value of up to 92%.
Refractory concrete fitting
Long boiler life: Reliable operation is also ensured by a high-quality refractory concrete nozzle that can withstand temperatures up to 1350 ° C.
Loading chamber door
Through the loading door, it is possible to load wood with a length of up to (350 mm and 750 mm) into the boiler. The boiler has an oversized loading chamber with a volume (82 and 190 liters). The advantage of the above-standard loading space is the division of wood at the meter, which you only need to divide once.
The turbulator cleaning lever is used to clean the dirt deposited between the turbulators. All versions except the 15 kilowatt version have a manual lever.
The side opening of the boiler is used to clean the ash from the turbulators. The cleaning intensity depends on the heating intensity in the boiler.
It is used to maintain the boiler output
It is used to cool down the exchanger when the boiler emergency temperature is reached.
Automatic chimney flap
The chimney flap takes care of direct flue gas extraction from the loading chamber into the chimney and also serves for easier heating.
Combustion chamber door
The lower door is mainly used to clean the ash from the boiler. With the PROFI version, it is also possible to set the air supply manually.
Connection of biomass boiler to accumulation tank
Higher boiler output and choice of regulation
The DPX biomass boiler is equipped with Standard or Profi control. Boiler control is very simple, intuitive, each regulation has different properties. Of course, the boiler is automatically shut down after the fuel burns out, automatic cleaning, control of heating pumps and charging of the accumulation tank. We recommend purchasing an ATTACK Oventrop equipment and accumulation tank for the boiler to achieve higher boiler output. For regular service it is very important to buy the boiler in the country you live in.
High efficiency and ecological combustion
Protecting the environment is important to us. Therefore we produce our products to make the least possible impact on nature. The wood gasification technology is highly ecological and efficient compared to combustion in a conventional boiler. Gasification in the DPX boiler takes place through precisely controlled gasification technology. This improves the overall efficiency of wood combustion and its values reach up to 91%. Higher efficiency is mainly reflected in costs as you use less fuel than with a boiler with lower efficiency.
Comparison of boiler efficiency and fuel consumption ATTACK DPX with a conventional boiler