SLX wood gasifying boiler which has an oversized feeding chamber with a long time of burning
Reducing time by more than 50%. The ATTACK SLX biomass boiler is equipped with an oversized feeding chamber (200 and 230 liters) with a length (690 mm and 790 mm).
Oversized feeding chamber with volume of 200-230 litrov
With full use of the capacity of the chamber you can do other activities 8 to 12 hours. Continuous burning for one fuel load (applies only to continuous operation). The advantage of the oversized loading space is the division of wood at the meter which is sufficient to divide only once.
Dry coat – protect against creation of tar
Biomass boiler SLX, its quality and long lifetime
We developed the boiler with a precise focus on the quality of workmanship. It was important to choose the right materials and technological procedures to ensure the resistance of the boiler to various influences. The long service life of the boiler will be ensured by boiler steel 6 mm thick. Reliable operation is also ensured by a high-quality refractory concrete nozzle that can resist temperatures up to 1350 ° C.
Technical information of important parts of the boiler that may be of interest to you.
It is used to monitor the oxygen content
The boiler has a choice of two types of control electronics:
PROFI - Electronics with simple operation. With this electronics, the air supply control and exchanger cleaning are manual. More about PROFI electronicsPROFI
LAMBDA Touch - Electronics with 7-inch SMART LCD display. The air supply and cleaning of the heat exchanger are controlled automatically by servomotors. LAMBDA TouchLAMBDA Touch
The boiler is equipped with a high-efficiency tube heat exchanger with turbulators which contribute to the high efficiency of the boiler and reaches a value of up to 92%. The turbulators will also take care of a clean heat exchanger for you, in the LAMBDA Touch version.
Refractory concrete fitting
Long boiler life: Reliable operation is also ensured by a high-quality refractory concrete nozzle that can withstand temperatures up to 1350 ° C.
The boiler is also equipped with tar protection which is taken care of by a dry coat located around the perimeter of the entire loading chamber.
Loading chamber door
Through the loading door, it is possible to load wood with a length of up to (690 mm and 790 mm) into the boiler. The boiler has an oversized loading chamber with a volume (200 and 230 liters). The advantage of the above-standard loading space is the division of wood at the meter, which you only need to divide once.
The turbulator cleaning lever is used to clean the dirt deposited between the turbulators. Only the PROFI version has a manual lever. The LAMBDA Touch version is equipped with automatic turbulator cleaning by means of a servomotor.
The side opening of the boiler is used to clean the ash from the turbulators. The cleaning intensity depends on the heating intensity in the boiler.
Combustion chamber door
The lower door is mainly used to clean the ash from the boiler. With the PROFI version, it is also possible to set the air supply manually.
It is used to maintain the boiler output
It is used to cool down the exchanger when the boiler emergency temperature is reached.
Flue gas exhaust duct
The duct prevents unwanted smoke from the chamber.
Modern technologies and high efficiency
The SLX boiler was developed in our own Research&Development center. ATTACK SLX is equipped with a high-efficiency tube heat exchanger with turbulators which contributes to the high efficiency of the boiler and reaches a value of up to 92%. In addition, in the SLX LAMBDA Touch version the turbulators take care of a clean heat exchanger. The boiler is also equipped with tar protection thanks to dry coat located on four sides of feeding chamber.
Automatic cleaning of exchanger by turbulators in version Lambda Touch
Connection of biomass boiler to accumulation tank
Boiler comfort and choice of regulation
The SLX biomass boiler is equipped with Profi or Lambda Touch control. Boiler control is very simple, intuitive and many boiler functions are performed by the boiler itself. The boiler is automatically shut down after the fuel burns out, automatic cleaning, control of the heating pumps and charging of the accumulation tank or even control of the heating via a computer or smartphone. To achieve higher boiler output we recommend purchasing an accumulation tank and ATTACK Oventrop mixing equipment. For regular service it is very important to buy the boiler in the country you live in.
Biomass boiler SLX a eco-friendly burning
Ecological way of heating saves fuel and the environment. Gasification is much more efficient and effective compared to conventional combustion. Gasification produces lower CO2 emissions, low flue gas temperatures and significantly less ash creation. The cleaning time with the SLX boiler is shortened thanks to the gasification system.
Comparison of boiler efficiency and fuel consumption ATTACK SLX with a conventional boiler