Direct heated storage tank PZO
The piezoelectric lighter, which does not need electricity for its operation, takes care of the ignition of the tank burner. The water is gradually heated by the heat from the combustion of the gas which flows through the bottom of the tank and through the flue pipe. The directly heated tank only simply sets the temperature with a thermostat. In the range of 30 – 70 °C and the tank control will take care of maintaining the set temperature value. The water starts to heat up automatically after taking 20 liters of hot water or if its temperature drops by 5 °C.
Volumes of directly heated tanks with an output of 4,7 kW
Low emission burner LOW NOx
We have equipped the DHW tank with a low-emission LOW NOx burner, which combustion will be really ecological with. To keep water warm for as long as possible we used a steel tank with a ceramic layer, on which we placed an outside casing with high-quality thermal insulation.
Direct heated storage tank and safety function
In addition to the fact that the tank is reliable and high-quality. We also put emphasis on safety during its development. Therefore we have equipped it with flue gas backflow protection which is in charge of the flue gas thermostat. In case of a flue gas failure, the thermostat automatically stops heating and interrupts the gas supply.
Heating in a direct heated tank