Comfort throughout the year

ATTACK FCU WALL

Suitable for heat pump systems.

The wall-mounted ATTACK FCU fan coil uses hot or chilled water from a heat pump to heat and cool rooms. Six FCU-W models cover an output range of 1.8 to 10.8 kW.

Model
  • FCU-W 2: 1.8 / 2.7 kW
  • FCU-W 3: 2.7 / 4.05 kW
  • FCU-W 4: 3.6 / 5.4 kW
  • FCU-W 5: 4.5 / 6.75 kW
  • FCU-W 6: 5.4 / 8.1 kW
  • FCU-W 8: 7.2 / 10.8 kW

Category: Fan coil units

1.8–10.8 kWOutput range across models
3 speedsFan speed settings
AutomaticLouvre swing
ComfortComfort throughout the year

Suitable where there is no room for a cassette unit

Wall-mounted design for smaller spaces

The unit is fixed to the wall and connected to the heat pump pipework. It requires only minor additional building work in an existing room. According to the manufacturer, a wall-mounted unit is often more cost-effective than a cassette unit at a comparable output.
Wall-mounted ATTACK FCU fan coil shown in an interior

Detailed specifications

Technical data and documents

Test conditions: two-pipe system. For cooling, entering air is 27 °C dry-bulb / 19.5 °C wet-bulb and water is 7/12 °C. For heating, entering air is 21 °C and water is 60 °C; water flow is the same as for cooling. Noise and electrical input are stated at high fan speed and 0 Pa static pressure.

ParameterUnitFCU-W 2FCU-W 3FCU-W 4FCU-W 5FCU-W 6FCU-W 8
Power supply—220 V / 50 Hz, 1 phase220 V / 50 Hz, 1 phase220 V / 50 Hz, 1 phase220 V / 50 Hz, 1 phase220 V / 50 Hz, 1 phase220 V / 50 Hz, 1 phase
Air volume flow at high fan speedm³/h3405106808501,0201,360
Air volume flow at medium fan speedm³/h2603805156507651,010
Air volume flow at low fan speedm³/h180260340430520700
Static pressurePa000000
Total cooling capacity at high fan speedW1 8002 7003 6004 5005 4007 200
Sensible cooling capacity at high fan speedW1 3502 0252 7003 3754 0505 400
Total cooling capacity at medium fan speedW1 4762 2142 9523 6904 4285 904
Sensible cooling capacity at medium fan speedW9781 3991 9632 4093 0443 926
Total cooling capacity at low fan speedW1 0981 6472 1962 7453 2944 392
Sensible cooling capacity at low fan speedW6499601 3551 7152 0602 710
Heating capacity at high fan speedW2 7004 0505 4006 7508 10010 800
Heating capacity at medium fan speedW2 1463 2194 2935 3666 4398 586
Heating capacity at low fan speedW1 5122 2683 0243 7804 5366 048
Noise level at high fan speeddB(A)394142454647
Electrical input at high fan speedW5052607595130
Water flow ratem³/h0.310.460.620.770.930.93
Pressure dropkPa1214171822.523.5
Water inlet connection—G1/2″G1/2″G1/2″G1/2″G1/2″G1/2″
Water outlet connection—G1/2″G1/2″G1/2″G1/2″G1/2″G1/2″
Heat exchanger type—High-efficiency copper tube with aluminium fins and hydrophilic coatingHigh-efficiency copper tube with aluminium fins and hydrophilic coatingHigh-efficiency copper tube with aluminium fins and hydrophilic coatingHigh-efficiency copper tube with aluminium fins and hydrophilic coatingHigh-efficiency copper tube with aluminium fins and hydrophilic coatingHigh-efficiency copper tube with aluminium fins and hydrophilic coating
Maximum pressureMPa1.61.61.61.61.61.6
Condensate drain connection—G1/2″G1/2″G1/2″G1/2″G1/2″G1/2″
Dimensions (L × H × W)mm850 × 300 × 198850 × 300 × 198970 × 315 × 235970 × 315 × 2351,100 × 330 × 2351,100 × 330 × 235
Weightkg111115152020

Customer service

Service support throughout the year

ATTACK service partners provide prompt service support throughout the year.

Service support

Output selection should be handled by an expert

Is ATTACK wall-mounted FCU right for your home?

Send us some details about your home and heating system. We will connect you with an expert partner who can check the design and installation.

Request a free quote