30 years of development and manufacturing

ATTACK HYDRO COMBI 250 INOX stainless steel combination tank

Domestic hot water and heating water in one tank.

The tank combines a 200-litre domestic hot-water cylinder with a 50-litre heating-water buffer section. A large-area stainless steel heat exchanger and a 3 kW electric element support hot-water preparation.

Variants
  • HYDRO COMBI 250 INOX

Category: Domestic hot water tanks

200 + 50 lDHW and buffer capacity
Stainless steelMaterial
3 kWElectric heating element
Robot-weldedwith high precision

For heat pumps

Two water volumes in one tank

ATTACK HYDRO COMBI combines a 200-litre domestic hot-water tank with a 50-litre central-heating buffer section. The large-area heat exchanger and connections are designed for integration with a heat-pump system.
ATTACK HYDRO COMBI 250 INOX stainless steel tank

Detailed schematic information

HYDRO COMBI connections and service points

The manufacturer’s diagram marks the heating-water, circulation and domestic hot-water connections, sensors, anode and drain points.

HYDRO COMBI connections and service points
Technical diagram of the ATTACK HYDRO COMBI tank with marked connections

Komponent 1 / 14

Central-heating flow connection G 1½″

Position 1: heating-water flow connection.

Komponent 2 / 14

Circulation inlet G 1½″

Position 2: circulation branch inlet.

Komponent 3 / 14

Central-heating inlet G 1″

Position 3: heating-water inlet.

Komponent 4 / 14

Central-heating outlet G 1″

Position 4: heating-water outlet.

Komponent 5 / 14

Circulation outlet G 1½″

Position 5: circulation branch outlet.

Komponent 6 / 14

Central-heating return G 1½″

Position 6: heating-water return connection.

Komponent 7 / 14

Water drain G ¾″

Position 7: water drain.

Komponent 8 / 14

Hot-water outlet G 1½″

Position 8: domestic hot-water outlet.

Komponent 9 / 14

Temperature sensor G ½″

Position 9: temperature sensor connection.

Komponent 10 / 14

Anode G ¾″

Position 10: anode connection.

Komponent 11 / 14

Temperature sensor G ½″

Position 11: temperature sensor connection.

Komponent 12 / 14

Cold-water inlet G 1½″

Position 12: cold-water inlet.

Komponent 13 / 14

Water drain G ¾″

Position 13: water drain.

Komponent 14 / 14

Circulation outlet G 1″

Position 14: circulation branch outlet.

Detailed specifications

Technical data

Check the manufacturer's current documentation before designing the heating system.

ParameterUnitHYDRO COMBI 250 INOX
Overall height including feetmm1797
Width (outside diameter)mm560
Domestic hot-water tank capacityl200
Central-heating buffer capacityl50
Stainless steel heat-exchanger aream²2.6
Electric element outputkW3
Polyurethane insulation thicknessmm50

Product materials

Download documents

Customer service

Installation support

ATTACK service partners provide expert help with installation and throughout operation. Contact an expert partner for help designing the system connection.

Service support

Need advice?

Choose a tank for your heat pump

An expert can help assess the domestic hot-water capacity, heating-water buffer volume and heat-source output.

Request a free quote