ATTACK Heating Application
For the ATTACK Inverter R32 heat pump, we provide a WIFI router along with access to the ATTACK Heating mobile application completely free of charge.
Discover the comfort of the mobile application
Get a perfect overview of the current status and full control over the heat pump from anywhere in the world.
Control from work or vacation
With the mobile application, it is possible to set the required temperature of CH (Central Heating) and DHW (Domestic Hot Water). During absence from the house, you can lower the temperature and increase it before arriving home. In longer absence, e.g. vacation, the application has a holiday mode function. The application offers a perfect overview of current electricity consumption, compressor activity, operating modes, and set programs.
What do the individual icons in the application mean?
Active status
The green icon means that the wifi router is connected to the internet and can be controlled remotely.
Inactive status
The gray icon means that the wifi router is not connected to the internet. In this case, check the Internet.
Inverter Compressor
Compressor power in percent indicates the current power.
Inverter Compressor
Compressor in inactive mode.
Current mode
Currently set mode in the main menu.
Active set programs
Set night mode for noise reduction.
Defrosting
Defrosting of the heat pump to ensure reliable operation.
Redirection
Redirection of electricity from low to high tariff.
Notifications
Current notifications about application updates, error and information messages, and messages that the user sets themselves, such as a drop in the required temperature.
Temperature in the house
Current temperature in the house.
Outdoor temperature
Current outdoor temperature.
325W
Current consumption.
Central Heating MODE
CH symbol – Central Heating. With an active flame, the heat pump heats the water.
Domestic Hot Water MODE
DHW symbol – Domestic Hot Water. With an active flame, the heat pump heats the water.
Event planning
Symbolizes active ongoing temperature setting plans from CH or DHW event planning.
Settings
Wide range of settings and parameters such as: Zone 1, 2, holiday mode, anti-legionella function, night mode, backup heating, etc..
Main menu
In the main menu, it is possible to turn the heat pump off/on and change modes: Cooling, heating, DHW, auto. The selected and active mode will be displayed in the top panel.
Info
Detailed information about the state of the outdoor unit.
Detailed information
The mobile application offers detailed information about the state of the heat pump.
Monitor your consumption
We strive to constantly innovate our application and bring new features that make life easier for our customers.
Electricity consumption counter
0 W You can go to the counter menu by clicking on the Watt consumption on the main screen.
Resetting the consumption counter
Reset symbol – Pressing the reset button resets the electricity counting, which is counted every day. Counting will start again and does not affect the consumption in historical data.
HISTORICAL DATA
Application menu – Electricity consumption can be monitored in more detail in historical data in the “Energy consumption” column. The graph can display any period in a maximum range of 3 months.
Every day is SMART
Use your time efficiently. We strive to constantly innovate our application and bring new features that make life easier for our customers.
Heat pump ATTACK Inverter R32 air water monoblock type