+421 43 4003 115
Pellet burner – burning and comfort
The ATTACK Pellet Burner Automatic pellet burner has been designed from the outset to offer comfort not only in fuel combustion but also in setting and operating. The pellets are automatically drawn from the fuel feeder which fall into the burner on the grate where they are ignited by electric ignition and the combustion itself begins. You can easily adjust the burner output according to your requirements in the range of 8 – 30 kW, always 2 kW lower or higher. You can increase the comfort of operating the burner by using a room thermostat to control its operation.
Pellet burning in ATTACK Pellet burner Automatic
Quality in construction
We used high-quality heat-resistant stainless steel in the production of the combustion chamber, grate, lighter plate and burner scraper. You can rely on the quality and processing of the material, it is the result of our production process as well as other ATTACK products. A pellet burner that can withstand high temperatures is a guarantee of long life.
Automatic burner’s cleaning
The comfort of the pellet burner does not end only during heating and combustion. It automatically stops the burning itself. The burner also has automatic cleaning, so that after each burnout or a certain time interval of operation, the grate is automatically extended, which is cleaned by moving against the scraper. Dirt such as ash and eschars fall out through the opening through the grate. After cleaning, the burner goes into standby mode and its work is finished.
Cleaning of pellets is carried out by ejecting and inserting the burner’s grate
The burner has 4 phases of protection against overheating
Pellet’s burner and high safety
In addition to the high quality and comfort of the burner, the safety of operation is a matter of course. The burner with safety elements against back-burning and up to 4 times the protection against overheating (emergency, boiler and flue gas thermostat, cooling circuit). In the case of automatic operation of the burner, you can engage in other activities and everything will be taken care of by a burner for you.
Pellets burner and its characteristics
- Precise measuring of flame intensity by photocell
- Option to connect external sensor into accumulation tank
- Option to connect different types of fuel feeders
- Multilingual menu, option to set wide scale of parameters
- Compact design, easy control, information on LCD display
- Error diagnostics
ATTACK Pellet burner automatic is used in all combined and pellet boilers.
Burner’s burning chamber with pellets
Conversion kit
Would you like to change a wood-gasification boiler into a combined boiler? We have an effective solution for you. Heating with wood and pellets is possible with a conversion kit. This set includes a pellet burner, a pantograph on which the burner is located and allows you to select the burner from the boiler and a special door for changing the fuel in case you decide to heat only with wood. The conversion can be done for the DPX and SLX model series.
