Heat pumpt Inverter R32 using inverter technology
This emission-free heat source uses renewable environmental energy for its functions. The device works with a highly environmentally friendly refrigerant R32 which has a minimal impact on the Earth’s ozone layer. State-of-the-art inverter technology brings significant energy savings and significantly extends the life of the heat pump. During its operation it achieves a high coefficient of performance COP.
Solution for new buildings
The heat pump is an ideal solution for modern new buildings with energy class A0. However, it should be mentioned that the high seasonal energy efficiency of heating A +++ will save costs even for renovated houses. An air / water heat pump system is less capital intensive than other heat pump systems (eg water / water, ground / water).
Heat pump ATTACK Inverter R32 installed in family house
An air / water heat pump system is less capital intensive than other heat pump systems (eg water / water, ground / water).
The built-in holiday mode allows the use of this system of operation at least during the time when residents are away from home for a long time. The holiday regime allows for a regular start and end time for this period. In this mode, the system works to maintain the minimum desired temperature to save the maximum amount of energy. The system switches back to normal mode at the end of the holiday time so that residents return to the space heated by their set temperature, thus maintaining a high level of comfort and minimizing heating costs during the absence of the occupants.
Low noise and a wide selection of power
Modern technologies come with power modulation and low noise. In the interior a noiseless indoor hydraulic unit with a touch screen is installed for simple and very intuitive control of the entire system. All functional and moving parts of the device are installed in the outdoor unit outside the residential part of the house. There is a wide range of heat pump outputs to choose from ATTACK 6, 9, 12, 15 and 19 kW. Outdoor unit Monoblock The ATTACK heat pump consists of an outdoor and an indoor unit. The outdoor monoblock unit consists all the necessary components which makes installation and service easier.
Heat pump air/water and outdoor unit Monoblock
The ATTACK heat pump consists of an outdoor and an indoor unit, the outdoor monoblock unit contains all the necessary components which makes installation and service easier.
The indoor wall unit is the perfect solution in cases you want to keep your existing system for preparing hot drinking water or in case you have limited space. The compact unit contains all the necessary hydraulic connections in its modern and simple design which ensures quick installation and easy maintenance.
Protection against bacteria
ATTACK heat pumps are equipped with a special Anti-Legionella function which prevents the formation of harmful bacteria in the storage tank and DHW distribution.
Technical information about important parts of the air/water heat pump that may interesting for you.
It ensures the supply of air from which energy is taken from the evaporator.
It is used to absorb energy from the surrounding air.
The energy is transferred from the refrigerant to the heating water In the condensing heat exchanger.
It is a drive unit that serves to increase the pressure and temperature of the refrigerant in the heating circuit.
It collects and captures the liquid form of refrigerant.
Electronic expansion valve
Ensures the expansion and flow of liquid refrigerant into the evaporator while there is a steep fall in pressure and temperature.
It is used to reverse the cooling circuit, which allows the heat pump to heat or cool
It is used to control the operation of the outdoor unit. Controls and optimizes the unit control function.
It is used to defrost frozen condensate in the winter months.
It is used for anti-freeze protection of the outdoor unit .
High efficiency inverter compressor
The heart of the device is a modern high-efficiency inverter compressor of the Mitsubishi brand. The heated refrigerant exits the evaporator in gaseous form, while it is compressed by the compressor to a higher pressure and a higher temperature, which is used in the condenser to transfer the heat of the heating water to the home.
Heat pump Inverter R32 can be controlled remotely via WIFI
The Inverter heat pump has a simple and very intuitive control via a 5 ”fully graphical touch screen which enables the control of two other temperature-independent heating circuits by controlling the zone mixing valve and the circulation pump. The pump can also be controlled remotely via the Internet via a wifi module and a mobile application. The mobile application can be tried after downloading in demo mode and thus discover what it can control. The heat pump is also equipped with an equithermal regulation function, whereby it adaptively adapts its performance to the current need of the heated space based on the measurement of the current outdoor temperature.
Mobile app ATTACK Heating
Heat pump Inverter R32 has heating and cooling in one
Year-round operation with the possibility of cooling, heating with stable output even at very low outdoor temperatures and DHW preparation in an external storage tank up to a temperature of 55 °C. The ATTACK Inverter R32 does not require a large heating water tank for its operation, which unnecessarily takes up valuable house space. A minimum storage supply of heating water with a volume of only 50 liters is richly sufficient for its operation. The heat pump can operate in several types of selected modes and their combinations: heating / cooling / DHW heating / holiday mode / quiet mode. It can communicate with backup heat sources in various types of heating systems. In addition to heating, it also manages to fully cool, and thus can ensure the required room temperature 365 days a year.
ATTACK Inverter R32 is able not only to heat but also to cool