Combined boiler with high comfort
The combined wood and pellet boiler uses all the advantages of the DPX boiler. When using pellets with a fully automatic Pellet Burner Automatic, the level of heating comfort is moved to a higher level. The burner can handle most of the work without any problems. The wood and pellet boiler will easily take care of the automatic cleaning of the grate, start and end of combustion. By using a room thermostat you can increase the comfort even more and control its operation without visiting the boiler room.
Feeding chamber of boiler DPX possible to use by the boiler DPX Combi Pellet
Extra-large feeding chamber
The combined boiler uses all the advantages of the ATTACK DPX boiler and high comfort is no exception. It provides an extra-large feeding chamber (125 – 190 liters) and long heating per one load of fuel. If you decide to heat wood from this boiler, you will save your time from processing the wood into smaller pieces.
Combined boiler and easy fuel change
The fuel change in the DPX Combi Pellet was designed with special emphasis on simplicity, greater comfort and low time. The conversion from a wood-gasifying boiler to a pellet boiler is really very simple and can be done by anyone. The fully automatic pellet burner is mounted on a movable pantograph, so it can be very easily inserted into the upper door of the boiler and you can use pellets as fuel. The great advantage of this boiler is the combination of cheap and ecological thermal energy obtained by gasification of wood and comfort, thanks to a fully automatic pellet burner.
The plug is used to change the fuel from pellets to wood
Technical information of important parts of the boiler that may be of interest to you.
The boiler has a control unit PROFI:
Electronics with simple operation. With this electronics, the air supply control and exchanger cleaning are manual. More about PROFI electronics PROFI
The boiler is equipped with a high-efficiency tube heat exchanger with turbulators which contribute to the high efficiency of the boiler and reaches a value of up to 92%.
Refractory concrete fitting
Long boiler life: Reliable operation is also ensured by a high-quality refractory concrete nozzle that can withstand temperatures up to 1350 ° C.
Loading chamber door
Through the loading door, it is possible to load wood with a length of up to (350 mm and 750 mm) into the boiler. The boiler has an oversized loading chamber with a volume (82 to 190 liters). The advantage of the above-standard loading space is the division of wood at the meter which you only need to divide once.
Čistiaca páka turbulátorov slúži na vyčistenie nečistôt, usadeních medzi turbulátormi. Manuálnu páku májú všetky verzie okrem 15 kilowattovej verzie.
The side opening of the boiler is used to clean the ash from the turbulators. The cleaning intensity depends on the heating intensity in the boiler.
It is used to maintain the boiler output
It is used to cool down the exchanger when the boiler emergency temperature is reached.
Automatic chimney flap
The chimney flap takes care of direct flue gas extraction from the loading chamber into the chimney and also serves for easier heating.
Combustion chamber door
The lower door is mainly used to clean the ash from the boiler. With the PROFI version, it is also possible to set the air supply manually.
Special doors for changing fuel
Special doors for changing fuel in case you decide to heat only with wood.
Pellet burner ATTACK Pellet Burner Automatic offers comfort not only when burning fuel but also setting and control. Pellets are automatically drawn from the fuel feeder which fall into the burner on the grate where they ignite with electric ignition and the combustion itself begins.
There is a burner on the pantograph thanks to which the burner can be easily removed and inserted into the boiler.
Combined boiler with even higher efficiency
The DPX Combi Pellet boiler is developed with an emphasis on high quality and high efficiency. You can therefore rely on great heating parameters, which are achieved by moving turbulators. Gasification takes place with precisely controlled technology as in the DPX boiler. Boiler control is very simple, intuitive, only PROFI control is used for this model. To achieve higher boiler output, we recommend purchasing an ATTACK Oventrop mixing equipment and also an accumulation tank. For regular service it is very important to buy the boiler in the country you live in.
ATTACK DPX COMBI PELLET – burning in burner